Chilled vs Frozen: A Guide to Reefer Temperature Classes

jiasou 14 2026-11-19 17:19:08 编辑

Introduction: One Vehicle, Two Very Different Jobs

A refrigerated truck that delivers fresh milk is not the same machine as one that hauls frozen fish, even when the cab and chassis look identical. The difference sits in the temperature class: the range of interior temperatures the insulation and refrigeration unit are built to hold, tested and certified as a system. Choosing the wrong class means either spoiled chilled cargo, an overworked diesel unit burning fuel to chase a setpoint it was never rated for, or money spent on deep-freeze capability a dairy round will never use. This guide explains how chilled and frozen classes are defined, what each class means in practice, and how to match a truck body to the products you actually plan to carry when ordering a refrigerated vehicle from China.

What "Chilled" and "Frozen" Actually Mean

Chilled and frozen are engineering bands, not marketing words. Each band pairs a target temperature with an allowable tolerance, and the vehicle must hold that band at a defined ambient temperature, not just on a cool morning.

The Chilled Band: Above Freezing, Below Room Temperature

Chilled transport keeps cargo between roughly 0°C and +8°C. Fresh dairy, most fresh meat, ready meals, and Vaccination-style pharmaceutical loads travel in this band, with tighter sub-bands for sensitive products such as fresh fish on ice (close to 0°C) or leafy vegetables that suffer chill injury if pushed too cold. A chilled body still needs real insulation and a working refrigeration unit, because the enemy is not only heat but also unwanted freezing on cold nights.

The Frozen Band: At or Below −18°C

Frozen distribution generally means holding cargo at −18°C or below, the widely used benchmark for quick-frozen food. Hard-to-hold products such as ice cream ask for colder setpoints, commonly −20°C to −25°C, because any softening shows up instantly in product quality. Frozen work demands thicker insulation walls, a refrigeration unit with enough capacity at very low evaporator temperatures, and door discipline, because every opening dumps cold air that the unit must claw back.

The ATP Class System in Plain Language

Most international cold-chain contracts reference the ATP, the Agreement on the International Carriage of Perishable Foodstuffs administered by UNECE. Under the ATP framework, mechanically refrigerated equipment is classed by the lowest interior temperature it can hold under test. In cross-border food logistics the classes that matter most are Class A (rated to hold up to about +7°C), Class B (down to −10°C) and Class C (down to −20°C); multi-class equipment such as B/C is certified to the coldest class shown on its plate. When you buy a body described only as "insulated box with cooling unit," you have no class guarantee at all.

ATP classApproximate holding capabilityTypical duty
Insulated only (Class D territory)Limits temperature rise, no active cooling to deep levelsShort hops, pre-cooled cargo, ice-supplemented loads
Class AHolds chilled setpoints up to about +7°CFresh produce, dairy, chilled distribution
Class BDown to about −10°CCold-chilled goods, lightly frozen distribution
Class CDown to about −20°CFrozen food, ice cream logistics

Treat these figures as a certification vocabulary for writing purchase specifications, and always confirm the actual test certificate for the specific body and unit combination you are buying, because the class applies to the tested pairing of box and refrigeration machine, not to either component alone.

Matching the Setpoint to the Product

The fastest way to pick a class is to list the products you will actually carry, find the strictest band among them, and buy to that band plus a safety margin. The table below pairs common cargo groups with the setpoints buyers typically specify.

Product groupTypical transport bandClass that comfortably covers it
Fresh vegetables and fruit0°C to +8°C depending on varietyClass A
Fresh dairy and chilled meat0°C to +4°CClass A
Chilled ready meals, pastry0°C to +4°CClass A
Frozen meat, seafood, bakery−18°C and belowClass C
Ice cream−20°C to −25°C setpointClass C with capacity margin
Mixed chilled plus frozen dropsTwo zones in one bodyMulti-temperature build

Single-, Dual- and Multi-Temperature Bodies

A single-temperature body has one insulated space and one setpoint, which keeps it simple, light and cheapest to certify. A dual- or multi-temperature body divides the cargo space with a movable insulated partition so one half runs chilled while the other runs frozen, trading payload volume and adding a second evaporator or a split refrigeration circuit. Multi-temperature makes sense for distributors who deliver mixed orders to shops on one route; it wastes money for a fleet that always moves one product family. Every partition, door and floor channel adds weight, so a multi-temp body of the same external size carries less cargo than a single-temp one.

Specifying a Reefer from a Chinese Supplier

Chinese body builders and chassis makers can supply refrigerated vehicles across these classes, but the specification you write determines what arrives at the port. Use this checklist when you request a quotation.

  • State the ATP class you need (for example Class C) and ask for the test certificate for the body-and-unit pairing, not a brochure claim.
  • State insulation type and thickness (polyurethane sandwich panel is the norm) and the wall K-value the builder commits to.
  • Name the refrigeration unit brand and model tier, and the standby electric option for loading-dock use.
  • Confirm floor type (aluminum T-rail or similar for airflow), drain plugs, and door curtain specification.
  • Define maximum ambient temperature the unit must hold the setpoint at, which is the real test of capacity in hot climates.
  • For multi-temperature work, specify partition design, independent zone control, and how zone volume can be adjusted.
  • Ask how temperature is recorded, and whether a data logger with exportable records is fitted.
  • Match the chassis gross weight and payload to the body plus refrigeration unit weight, not the chassis brochure figure alone.

Frequently Asked Questions

Can one refrigerated truck carry both chilled and frozen cargo?

Only if it is built as a dual- or multi-temperature vehicle with an insulated partition and separate zone control. A single-temperature Class A body cannot be "pushed" to frozen setpoints by turning the dial down, because the unit and insulation were not sized for that duty. If mixed loads are regular business, specify multi-temperature from the start and accept the payload penalty the partition creates.

Is a Class C body acceptable for chilled work?

Yes. A Class C body can hold colder temperatures than chilled cargo needs, so it covers Class A and B duties with room to spare. The trade-offs are higher purchase cost, thicker walls that eat payload volume, and a heavier unit. Fleets that run seasonal mixes, or expect frozen contracts later, often buy Class C precisely for this flexibility.

What is the difference between insulated and refrigerated?

An insulated box slows temperature change but has no refrigeration machine, so it suits short journeys with pre-cooled cargo. A refrigerated body adds an active unit that extracts heat, holding a setpoint for hours regardless of ambient conditions. For anything beyond short urban hops, buyers specifying ATP-referenced contracts normally require mechanically refrigerated equipment, not insulation alone.

How does ambient temperature affect the class I should buy?

Class ratings are proven under test conditions; real capacity depends on the heat load the unit must overcome, which rises with ambient temperature, sun on the roof, door openings and cargo that enters warmer than the setpoint. In hot-climate markets, ask the supplier to confirm holding capability at your design ambient, and size the refrigeration unit with margin rather than matching the minimum class figure.

Do I need a data logger if my customer does not ask for one?

Fitting one is still sound practice. Temperature records turn a spoilage dispute into a document review instead of an argument, support insurance claims, and are increasingly required by retail and pharma customers. Exportable records from a sealed logger are inexpensive relative to the value of one rejected load, so most buyers treat logging as standard specification.

Conclusion: Buy the Class Your Cargo Actually Needs

Temperature classes exist so that a buyer in one country can order a vehicle from a builder in another and know exactly what the machine will do. Decide your strictest product band first, translate it into an ATP class, verify the certificate for the body-and-unit pairing, and only then compare prices between suppliers. A Class A van bought for a frozen route, or Class C money spent on a dairy round, is a specification error no discount can fix. When you are ready to compare refrigerated vehicle options from Chinese suppliers, AutoCN's sourcing team can help you collect specifications and documentation before any deposit is paid.

上一篇: Chinese Electric Commercial Vehicles for Fleets: Guide 2026
下一篇: Pickup or Cargo Van for Business: A Side-by-Side Comparison
相关文章